Dead Rabbit RDA by Hellvape
Note: Drip tip color will vary. The color of the drip tips is randomly prepackaged from the manufacturer. Photos are for reference and are not representative of variance in each unit.
The HellVape Dead Rabbit RDA is a fully comprehensive rebuildable atomizer. It features an elevated "postless" quad terminal build deck and a diagonal, dual slotted, top-side airflow design. The HellVape Dead Rabbit RDA features a dual slotted top-side airflow. The airflow is crafted with diagonal orientation, resulting in an enhanced flavor. The airport also provides excellent cooling properties to the internal chamber. The Dead Rabbit RDA measures 24mm in diameter. The build deck integrates a unique quad terminal "postless" design, fully elevated to create spacious building and wicking area. The terminal openings measures 2.5mm in diameter. This size accommodates large wires when coil leads are inserted and side-secured via Phillips or hex flathead screws. The entire deck connects to a PEEK-insulated block for a heat resistant foundation with the positive posts gold-plated for strong conductivity to run high powered configurations. The user-friendly build deck and addition of creative design makes the Dead Rabbit RDA is a top high-performance rebuildable dripping atomizer.
Specs and Features for Dead Rabbit RDA by Hellvape:
- Dimensions: 1-1/2" x 1" (Including Drip Tip and Threads)
- A Vapin' Heathen Project
- 24m Diameter
- Deep Juice Well
- Superior Stainless Steel Construction
- Elevated Postless, Quad Terminal Design
- 2.5mm Terminal Openings
- Side-Secured via Slotted or Hex Flathead Screws
- Gold-Plated Positive Posts
- PEEK Insulated Block
- Single or Dual Coil Configurations
- Dual Slotted Top-Side Airslots - Diagonal Orientation
- 810 17mm Wide Resin Drip Tip
- 810 16mm Wide Delrin Drip Tip
- 510 Drip Tip Adapter
- Squonk-Ready Bottom-Feeding 510 Pin
- Gold-Plated 510 Contact Pin
- 1 x Dead Rabbit RDA
- 1 x Delrin Widebore Drip Tip
- 1 x 510 Drip Tip Adapter
- 1 x Squonk-Ready 510 Pin
- 2 x Hex Allen Key
Rebuildable atomizer: The user of this atomizer must install wick and wire (coil) in order to use it. This atomizer is not pre-installed with coil. Installation is required. Wick, wire and mesh sold separately.
Rebuildable atomizer coils and wicks have known risks.
Rebuildables are for experts, not average or beginner vapers with no multimeter or knowledge of how to use a meter, or when a meter must be used, or how electronic devices work. These materials cannot safely be used by the inexperienced or those without basic knowledge of electronics.
This is because:
- A rebuildable coil/wick MUST be tested carefully with a meter before it is used.
- If it is not tested it is entirely the risk of the user.
- Faulty wicks/coils WILL blow electronic devices.
- New coil/wick units must be tested and then used first on a strong basic electrical APV that has short circuit protection.
- No new coil/wick assembly should be used on an electronic device until known to be safe.
- These items destroy electronic devices if faulty. This is a known issue.
Due to the nature of this product there is no warranty. This product is for experienced users and requires technical knowledge in order to properly use it.